Equipment, cabling, installation and support, quoted line by line.
Buy the hardware from us, have us install equipment you already own, or hand us the whole project. Our labor rates and support plans are published below; equipment is priced in your written quote.
Equipment we supply
We specify hardware for the building in front of us. Model choices depend on user count, coverage area and whether you already run a vendor's platform.
- Routers & firewalls
- Next-generation firewalls with VPN, intrusion prevention and SD-WAN for one or more internet lines. A typical small-site pick is the Fortinet FortiGate 50G (2.25 Gbps IPS, 1.25 Gbps NGFW, 1.1 Gbps threat protection throughput per Fortinet's data sheet).
- Switches
- Managed PoE+ (802.3at) and PoE++ (802.3bt) switches in 8, 16, 24 and 48-port sizes, with fiber SFP uplinks between racks or buildings. Sized by port count and total PoE power budget.
- Wireless access points
- Ceiling, wall and outdoor APs, including Wi-Fi 7 models such as the Ubiquiti UniFi U7 Pro with a 2.5 GbE PoE+ uplink. Placement is planned for coverage at shelf height, not just in open floor.
- Surveillance cameras & NVRs
- Indoor dome, outdoor bullet and turret PoE IP cameras with IR night vision, recording to an on-site network video recorder. Storage is sized to the retention period you need.
- Access control
- Card and fob readers, door controllers, electric strikes, maglocks, door position sensors and request-to-exit buttons, with schedules and per-person access managed in software.
- Racks, cabling & power
- Wall-mount and floor racks, patch panels, cable management, Cat6/Cat6A cable, fiber, and UPS battery backup to keep the firewall, switches and NVR running through short outages.
Installation services
On-site cabling
New Cat6 and Cat6A drops, fiber runs between buildings, rack build-outs and cleanup of existing cabling. Terminated to ANSI/TIA-568, labeled at both ends and tested, with plenum-rated cable where code requires.
Equipment installation
Mounting APs, cameras and readers at the right height and angle, racking switches and firewalls, wiring door hardware, and connecting UPS backup.
Network configuration
VLAN segmentation, firewall policy, site-to-site and remote access VPN, Wi-Fi SSIDs and channel planning, camera recording schedules and access control groups.
Ongoing maintenance
Firmware updates, offline-device monitoring, license renewals, RMA handling for failed hardware, and moves, adds and changes as your site evolves.
How a project runs
- 01
Site survey
We visit, measure runs, check ceiling heights and racking, and note where Wi-Fi, cameras and doors need coverage. Free within 50 miles of Visalia.
- 02
Written quote
Itemized equipment list, cable drops, labor and an optional support plan. Sent within 3 business days of the survey.
- 03
Order & schedule
On approval we order equipment and book install dates around your opening hours or shifts.
- 04
Install & test
Cabling, mounting and configuration, followed by cable certification, Wi-Fi coverage checks and camera and door walkthroughs.
- 05
Handover & support
You receive admin credentials, config backups, a network diagram and the cable test record. Support starts the same day if you chose a plan.
Labor rates
Prices in USD, before sales tax. Runs over 150 ft, lifts for high ceilings, conduit and after-hours work are listed separately in the quote before you approve it.
| Line | Qty | Amount |
|---|---|---|
| Cat6 drops APs, cameras, POS | 14 | $2,310.00 |
| AP install & config | 3 | $285.00 |
| Camera install | 8 | $1,160.00 |
| Firewall & VLAN setup Hours | 4 | $500.00 |
| Service | Price |
|---|---|
| Site survey & written quoteWithin 50 miles of Visalia, CA | Free |
| Cat6 cable dropUp to 150 ft, terminated, labeled, tested | $165 / drop |
| Cat6A cable dropUp to 150 ft, terminated, labeled, tested | $215 / drop |
| Access point install & configurationOn an existing drop | $95 / AP |
| Camera install & aimingOn an existing drop | $145 / camera |
| Access-controlled doorLabor; hardware quoted separately | From $650 / door |
| Configuration & troubleshootingOn-site or remote, 2-hour minimum on-site | $125 / hour |
Support plans
Month to month, cancel with 30 days' notice. Device counts include firewalls, switches, APs, cameras, NVRs and door controllers.
Essentials
$149 /month
- Up to 25 network and security devices
- Firmware updates and offline alerts
- Remote support, next-business-day response
- RMA handling for failed hardware
Business
$349 /month
- Up to 75 devices
- 4-hour remote response, business hours
- Quarterly on-site health check
- License renewal tracking
- 10% off project labor
Multi-site
Quoted per site
- Several stores or warehouses on one plan
- Standard configuration across sites
- Site-to-site VPN management
- Scheduled visits per location
Equipment carries the manufacturer's warranty; our installation workmanship is warranted for 1 year. See our Refund Policy and Terms of Service.
Need a number for your project?
Book a survey and get an itemized quote within 3 business days of the visit.